Sea water series
P 52 EX
The sea water series is suitable for pumping aggressive liquids (acid, solvents, etc.). This thermoplastic pump made of reinforced polyester resin is also suitable for sea water transfers. The model P 52 EX (petrol) equipped with Viton gasket is the appropriate solution for hydrocarbon transfers (Diesel, Kerosene).
Viton Seal Kit
Viton seals have excellent mechanical properties. They are very resistant to oils, fuels, lubricants, most mineral acids and a large number of aliphatic or aromatic hydrocarbons that dissolve other rubbers.

Technicals charcteristics
Type of pump | Self-priming |
Ø of the Suction Connector | 50 mm (2″) |
Ø of the Discharge Connector | 50 mm (2″) |
Maximum flow rate | 750 L/min – 45 m3/h |
Pressure | 3.8 bar |
HMT (Height Manometric Total) | 38 m |
Maximum Suction Height | 8 m |
Grain size (Ø strainer hole) | 6 mm |
Mechanical packing | Ceramic carbon |
Engine | WORMS EX17 |
Engine type | 4 Petrol time OHV |
Fuel | Unleaded petrol 95 |
Tank capacity | 3.2 L |
Average autonomy | 2 h 20 |
Dimensions L x W x H | 520 x 400 x 425 mm |
Dimensions packed L x W x H | 532 x 420 x 445 mm |
Net dry weight | 24 kg |
Gross weight packed | 26 kg |
Standards equipments
- Startup Launcher
- Safety lack of electronic oil
- 4-stroke petrol engine
- Self-priming
- Silicon Carbon Mechanical Trim
- Plastic strainer, fittings and clamps
Optionnals equipments
- Kit brouette (option usine) : REF 13
- Raccords pompier
- Kit joints Viton
- Kit d’entretien N°2
Downloads